Maxon WL7-vers. C, Руководство по установке

Страница: 9 / 61

PATENTS PENDING
9
11921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
ELECTRICAL POWER
Vehicle must have a 12 volt dc electrical
system capable of supplying 65 amperes
of electrical power to the Lift for each
operating cycle.
SAFETY INTERLOCK SYSTEM
Vehicle must have an FMVSS 403 compliant, onboard
Safety Interlock System that interfaces with the Wheel-
chair Lift interlock signal. Interlock signal may be V+ or
V-. The interlock system on a host vehicle must:
For the applicable interlock electrical connections on the Lift,
refer to the
ELECTRICAL SYSTEM DIAGRAM in this manu-
al. For more information about the interlock connections, call:
•
Prevent the Lift from deploying when vehicle is in
drive or reverse.
•
Prevent the vehicle from moving when the Lift is
deployed.
•
Prevent the Lift from disabling vehicle if the Lift
signals a deployed condition when the vehicle is
moving.
LIGHTING
Public use vehicle manufacturers are responsible for
complying with Lift lighting requirements stated in Fed-
eral Motor Vehicle Safety Standard No. 404, Platform
Lift Installations in Motor Vehicles (49 CFR 571.404).
MAXON Lift Corp. Technical Service at (800) 227-4116