Maxon Intelimax+4G, Руководство пользователя

Страница: 91 / 94

In4G User Manual
- 91 -
EXTENDED /MODEM SPECIFI C AT COMMAND
SET (IP and SERIAL MODES)
Save settings and reset/restart modem
AT&W (Serial and IP Stack modes)
Saves AT command settings
AT%RESET=1 (Serial Modem mode only)
AT$$RESET (Serial and IP Stack modes)
Applies saved AT commands with a reboot
Standard AT Commands for serial interface
Note.1 : [ ] indicates default value.
Note.2 : &D option only valid when Serial Port is using no flow control. DTR signal will be
used together with CTS/RTS as Hardware Flow Control signals.
SMS Commands
Parameter Description
[E0]
Do not echo command set in command state or online command
state.
E1 Echo command set in command state or online command state.
[Q0]
Q1
Return result codes.
Do not return result codes.
[&C0] DCD line always ON.
&C1
DCD line is ON during a circuit switched call. In IP Stack mode, the
behaviour is the same as &C0.
&C2
DCD line is normally ON and will toggle OFF for 1 second when the
circuit switched call is disconnected. In IP Stack mode, DCD line will be
always OFF.
&C3
DCD line is normally OFF and will be ON when modem has successfully
established a PPP Data (packet switched) call (only applies to IP STACK
mode). In Serial Modem mode, DCD line will be always OFF.
&C4
DCD line is normally OFF and will be ON when modem has successfully
established a PPP Data and opened a socket with remote server (only
applies to IP STACK mode). In Serial Modem mode, DCD line will be
always OFF.
[&D0] Ignore DTR line signal.
&D1
Enter online command state following ON-to-OFF transition of DTR line
while retaining the data connection.
&D2
Disconnect the data connection following ON-to-OFF transition and
change to command state after back to ON state. In Serial Modem
Mode, during OFF state of the DTR line, the auto-answer function (see
S0) is disabled. During the transition, DTR line has to be in OFF state for
at least one second for the modem to respond.
S0
[2], <1 to 255>
0
Automatic answering. [Enable automatic answering
after (Value) x 6 seconds.]
0: No auto- answering