Maxon Intelimax+4G, Руководство пользователя

Страница: 32 / 94

In4G User Manual
- 32 -
data. A new line in the file is created each second and a timestamp can either be
enabled or disabled.
In order to use FTP on the In, please enable ‘append’ on your FTP server. Also
restrict the welcome message to less than 10 characters. Please save and apply settings
before using.
To enable FTP on the In you can use either AT commands or the GUI, the AT
commands are covered in the AT command section at the end of the manual. The FTP
settings are on the IP Stack tab of the GUI.
Here you can configure whether to upload the FTP files manually, hourly (0-24, number of
hours between uploads), by time of day (0-24, where 1 is 1AM and 13 is 1PM), by day of
month (1-31, for day of month), or by number of minutes passed (0-60, number of minutes
between uploads). The time interval field is used to configure the variable applicable to
each of these modes.
NOTE: when using Hourly and Minutes setting, using a time interval of 0 means never
upload automatically!
The FTP server information and logging options can all be configured here.
• FTP Sever Host IP/Domain address with Port
• User name and Password
• Message Logging Time interval
• Header of file name (limit 10 bytes/characters)
• Size of file (Bytes) – maximum 102,400 bytes, maximum internal buffer size 10MB. A
new file will be created each time the file size is exceeded.
• Time stamp – enable (1) or disable (0) timestamp prefix