Maxon GPTWR-25, Инструкции по установке

Страница: 38 / 70

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
38
STEP 7 - INSTALL CONTROL SWITCH - Continued
2.
Insert control switch wir-
ing into the 3/4” hole on the
corner post and run it under
the vehicle body to the pump
assembly.
(See dashed line
- FIG. 38-1.)
Insert switch
wiring through cord grip on
pump mounting plate (
FIG.
38-2)
. Connect the switch
wiring to the pump assembly
as shown in (
FIG. 38-2).
3.
Push control switch and ca-
ble back into the ¾” hole in
the vertical post until con-
trol switch cover touches
the post
(FIG. 38-1)
. Attach
control switch to vertical
post with 2 self-tapping
screws
(FIG. 38-1)
.
ROUTING CONTROL SWITCH WIRING
FIG. 38-1
3/4” HOLE
(2 PLACES)
VEHICLE BODY
VERTICAL POST
CONTROL SWITCH
WIRING
CONTROL SWITCH
SELF-TAPPING
SCREW, 1-1/2” LG.
(2 PLACES)
4.
If necessary, use clamps
and self-tapping screws,
from installation parts
bag, to secure switch
cable to vehicle (
FIG.
38-1)
.
CONTROL SWITCH WIRING CONNECTIONS
FIG. 38-2
SOLENOID SWITCH POWER DOWN MODULE
WHITE WIRE
GREEN WIRE
CORD GRIP
WHITE WIRE
TO TERMINAL 1
BLACK WIRE
TO TERMINAL 2
FUSE HOLDER
ASSEMBLY