Maxon GPTWR-25, Инструкции по установке

Страница: 58 / 70

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
58
STEP 15 - ADJUST WALK RAMP PADS
1.
Stow the platform
(FIG. 58-1A)
.
5.
Tighten the socket head
screws and lock nuts securely
(FIG. 58-1B)
.
LIFTGATE WITH
PLATFORM STOWED
FIG. 58-1A
4.
Slide the ramp pads to the edge of
the walk ramp (not shown)
(FIG.
58-1B)
.
2.
Loosen the socket head screws and
lock nuts
(FIG. 58-1B)
. Slide the
pads toward the outside of the walk
ramp box
(FIG. 58-1B)
.
3.
Install the walk ramp (not shown)
according to manufacturer’s in-
structions.
WALK RAMP
INSERTED HERE
WALK RAMP
BOX
EXTENSION
PLATE
(REF)
WALK RAMP PAD
(2 PLACES)
WALK RAMP LATCH
(REF)
SOCKET HEAD
SCREWS
(4 PLACES)
ADJUSTING WALK RAMP PADS
FIG. 58-1B
NOTE:
If necessary to lower each
walk ramp pad, the steel
shim under each pad can
be removed.
NOTE:
If a different ramp stop
method or equipment is
required, the ramp stops
shown in the illustration
can be removed.
SHIM
(REF)
RAMP STOP
(2 PLACES)
SHIM
(REF)