Maxon GPT Series, Руководство по установке

Страница: 3 / 38

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
3
• Keep decals clean and legible. If decals are defaced or missing, replace them. Free replacement
decals are available from Maxon Customer Service .
• Consider the safety and location of bystanders and location of nearby objects when operating the
Liftgate. Stand to one side of the platform while operating the Liftgate
• Do not stand under, or allow obstructions under the platform when lowering the Liftgate. Be sure
your feet are clear of the Liftgate.
• Keep fingers, hands, arms, legs, and feet clear of moving Liftgate parts (and platform
edges) when operating the Liftgate.
• Wear appropriate safety equipment such as protective eyeglasses, faceshield and clothing while
performing maintenance on the Liftgate and handling the battery. Debris from drilling and contact
with battery acid may injure unprotected eyes and skin.
• Make sure vehicle battery power is disconnected while installing Liftgate. Connect vehicle
battery power to the Liftgate only when installation is complete or as required in the installation
instructions.
• Do not allow untrained persons to operate the Liftgate.
• Be careful working by an automotive type battery. Make sure the work area is well ventilated and
there are no flames or sparks near the battery. Never lay objects on the battery that can short the
terminals together. If battery acid gets in your eyes, immediately seek first aid. If acid gets on your
skin, immediately wash it off with soap and water.
• If an emergency situation arises (vehicle or Liftgate) while operating the Liftgate, release the control
Toggle Switch and the Liftgate will stop.
Comply with the following WARNINGS while installing Liftgates. See Operation Manual
M-97-16 for operating safety requirements.
• Read and understand the instructions in this Installation Manual before installing Liftgate.
• Before operating the Liftgate, read and understand the operating instructions in Operation Manual
M-97-16 .
• Comply with all WARNING and instruction decals attached to the Liftgate.
• A correctly installed Liftgate operates smoothly and reasonably quiet. The only noticeable noise
during operation comes from the pump unit while the platform is raised and lowered. Listen for
scraping, grating and binding noises and correct the problem before continuing to operate Liftgate.
• If it is necessary to stand on the platform while operating the Liftgate, keep your feet and any
objects clear of the inboard edge of the platform. Your feet or objects on the platform could be
trapped between the platform and the Liftgate extension plate.
• Never perform unauthorized modifications on the Liftgate. Modifications may result in early failure of
the Liftgate and may create hazards for Liftgate operators and maintainers.
!
• Correctly stow platform when not in use. Extended platforms could create a hazard for
people and vehicles passing by.
WARNING S