LIFT CORPORATION
Sht. 5 of 13 DSG#
M-16-04
Rev.
A
Date: 01/13/17
© MAXON Lift Corp. 2017
LH COLUMN
STREET-SIDE VIEW OF VEHICLE BODY
& LH COLUMN
FIG. 5-1
1.
Measure and mark 10” from the LH
column and 2” in from the edge of the
vehicle. Then, position the angle (Kit
item) on crossmembers of vehicle
body
(FIG. 5-1)
.
2 WELDS MIN,
MORE IF POSSIBLE
10”
1/8”
2”
CROSSMEMBER
`
Recommended practices for welding on steel parts are contained in the current
AWS (American Welding Society) D1.1 Structural Welding Code - Steel. Damage
to Liftgate and/or vehicle, and personal injury can result from welds that are done
incorrectly.
WARNING
!
2.
Weld the angle to the truck/trailer crossmembers
(FIG. 5-1)
.
3.
Bolt the angle plate (Kit item) to angle
(FIG. 5-2)
.
HEX CAP SCREW, 3/8”-16
(2 PLACES)
FLAT WASHER, 3/8”
(2 PLACES)
BOLTING ANGLE PLATE TO ANGLE
(LH COLUMN SHOWN)
FIG. 5-2
LOCK NUT, 3/8”-16
(2 PLACES)
ANGLE PLATE
2”X2” ANGLE
2”X2” ANGLE
