LIFT CORPORATION
Sht. 4 of 13 DSG#
M-16-04
Rev.
A
Date: 01/13/17
© MAXON Lift Corp. 2017
WIRING HARNESS LOCKING RING CONNECTORS
Before connecting, ensure connectors are clean inside. Ensure there is a thin
coating of dielectric grease on face of receptacle, and there is no dielectric
grease on connector contacts.
CAUTION
Refer to illustrations below for disconnecting,
checking for dielectric grease, and reconnecting
locking ring style connectors.
ALIGN & CONNECT
FIG. 4-5
TURN LOCKING
RING TO UNLOCK
FIG. 4-1
ALIGN TAB &
SLOT
PULL CONNECTOR
TO DISCONNECT
FIG. 4-3
TIGHTEN TO LOCK
FIG. 4-6
PULL LOCKING RING
TO DISENGAGE
FIG. 4-2
DIELECTRIC GREASE
ON RECEPTACLE
FIG. 4-4
LOCKING
RING
THIN COAT OF DIELECTRIC GREASE
ON SHADED AREA
