OUT-LOOK
Outdoor/indoor intrusion detector
Preliminary Quick Reference
Ver.1 28/05/2008
Page
2
(of 6)
ON
LEDs
OFF
After 15
minutes
#4
.
#5
.
Detection
Range Setting
Auto Night
Detection mode
DIP SWITCH SETTING
#2
.
Pulse Count
4
2
Low
High
Anti-masking
Sensitivity and
Learning,
and Detection
Technology
Combination
OR
AND
#3
.
Physical
setting,
by
Trimmers
Setting
by "Walk
Test"
Low
High
Microwave and PIR sensitivity
adjustment
High
Microwave
Sensitivity
Adjustment
PIR
Sensitivity
Adjustment
High
ON
OFF
DIP Switch Specifications
DIP Switch
#1
,
LED indication:
ON or OFF (when switching to OFF, the LED indication will be
enabled for 15 minutes- in order to allow "walk test".
DIP Switch
#2
,
Pulse Count:
Select between 2 or 4 pulses.
Choose 2 pulses in a place with a low risk to false alarm.
Choose 4 pulses in a place with a high risk to false alarm.
DIP Switch
#3
,
Anti-masking Sensitivity and Learning, and Detection Technology Combination:
a.
Select between LOW and HIGH Anti-masking Sensitivity.
Choose
LOW
Anti-masking Sensitivity in a place suffering of dust.
Choose
HIGH
Anti-masking Sensitivity in a place that doesn't suffering of dust.
b.
Learning
: Once the state of the DIP switch is changed, OUT-LOOK learns the environmental conditions
of its protected area (refer to page No.
6
).
c.
Select
AND
if you wish a true alarm will be generated just when the intrusion is detected by both
detection technologies (PIR
AND
Microwave).
Select
OR
if you wish a true alarm will be generated when the intrusion is detected by one of two detection
technologies (PIR
OR
Microwave).
Remark: the detection technology combination
OR
is valid just when OUT-LOOK detected that its near
field-of-view is masked/covered (Anti-masking). Otherwise, the detection technology combination is
AND
.
