background image

15

14

3. Plug in compressor, turn it on to set the 
    pressure regulator to 90 PSI, attach one end 
    of the air hose to the compressor and the other 
    end of the air hose (1) to the tool (2). Use 
    plumber’s tape to avoid air leak (see section 

    “Technical Specifications”) (

Fig. C

).

• Hold the tool firmly with both hands. Always point 

   abrasive material away from you while operating the 
   tool. Failure to comply could result in serious injury 
   or loss of life.

WARNING!

Potential hazard that could result in serious injury or 
loss of life.

DANGER!

Potential hazard that will result in serious injury or 
loss of life.

• Do not use grinding accessories other than those 
   that are specifically designed for use with an Air-

   powered Right Angle Die Grinder. Failure to
   comply will result in serious injury or loss of life.

2. Use the two wrenches (1) to loosen the 
    collet (2). Insert a suitable grinding 

    accessory into collet, and firmly retighten 

    the collet to lock the grinding accessory in 
    place using the wrenches (

Fig. B

).

4. With a firm grip on the tool, lightly press 

    the trigger (1) and apply accessory to 
    workpiece, slowly and steadily moving tool 

    until achieving desired finish on the 

    workpiece (

Fig. D

).

1. Disconnect the tool (1) from the air hose
   (2) (

Fig. A

).

LOADING AND OPERATION

model no. 058-9367-8 |  contact us 1-888-670-6682

Fig. A

Fig. D

Fig. C

Fig. B

TM

Содержание 058-9367-8














Отзывы: