Maximum 054-8382-4, Инструкция по эксплуатации

Страница: 24 / 31

24
model no. 054-8382-4 | contact us 1-888-670-6682
MAINTENANCE
BEFORE EACH USE
1. Inspect the circular saw, the trigger switch, the cord and the accessories for
damage.
2. Check for damaged, missing, or worn parts.
3. Check for loose screws, misalignment or binding of moving parts, or any other
condition that may affect the operation.
4. If abnormal vibration or noise occurs, turn the tool off immediately and have
the problem corrected before further use.
Unplug the tool from power source before cleaning or performing any
maintenance. Using compressed air may be the most effective cleaning method.
Always wear safety goggles when cleaning tools using compressed air.
MAINTENANCE
WARNING!
• Do not allow brake fluids, gasoline and petroleum-based products,
penetrating oil, etc. come into contact with plastic parts. These substances
contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other
parts may create a hazard or cause damage to the product.
• Use only accessories that are recommended for this circular saw by the
manufacturer. Accessories that may be suitable for one tool may become
hazardous when used with another tool.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly
maintained tools with sharp cutting edges are less likely to bind, and are
easier to control.
• To ensure safety and reliability, all repairs should be performed by a
qualified service technician.
FPO