15
5. Thread the lock nut on the spindle with
the flat side of the flange facing up,
making sure the opening in the wheel
is positioned around the raised portion
of the lock nut (fig 4).
6. Press the spindle-lock button to keep
the spindle from moving.
7. While pressing the spindle-lock button,
tighten the lock nut by turning it
clockwise with the wrench supplied.
TO REMOVE A WHEEL
1. Disconnect the plug from the electrical outlet.
2. While pressing the spindle-lock button, loosen the lock nut by turning it
counter-clockwise with the wrench supplied.
3. Remove the wheel from the spindle.
INSTALLING THE SIDE
HANDLE
(fig 5)
1. Disconnect the plug from the electrical
outlet.
2. The side handle may be installed on
the right side or the left side of the
tool. Thread the side handle into the
desired operating position.
3. Securely tighten the side handle by
turning it clockwise.
ASSEMBLY
INSTRUCTIONS
WARNING!
• When you are trying to remove a wheel, the tool must be
completely stopped. Do not depress the spindle-lock button
until the spindle has completely stopped moving.
• The side handle should always be used during operation.
FPO
fig 5
fig 4
Spindle
Grinding
wheel
Backing
flange
Lock nut
