13
ASSEMBLY INSTRUCTIONS
REPLACING THE WHEEL GUARD [4 1/2
"
(115 MM) AND 5
"
(125 MM)]
This grinder is supplied with 5" (125 mm) and 4 1/2" (115 mm) TYPE27 grinding
wheel guards. The size has been stamped on each guard (fig 1). Always make
sure that a wheel guard of the proper size is used when grinding with different
wheels.
fig 1
TO REMOVE THE WHEEL
GUARD
(fig 2a and 2b)
1. Disconnect the plug from electrical
outlet.
2. Remove wheel and flanges from the
tool; refer to the section “
INSTALLING
AND REMOVING THE GRINDING
WHEEL
”.
3. Open the guard latch; refer to fig 2a.
4. Rotate wheel guard clockwise until the
lugs on the guard match the notches
on the gear box cover; refer to fig 2b.
5. Lift wheel guard off the tool.
ASSEMBLY
INSTRUCTIONS
fig 2a
Guard
latch
fig 2b
Notches
Lugs
