Maximum 054-3245-2, Инструкция по эксплуатации

Страница: 3 / 12

4
model no. 054-3245-2 | contact us 1-888-670-6682
5
TM
S
AFETY INS
TRUCTIONS
MOTOR 18V DC
DRIVE 1/2” square
VARIABLE SPEEDS 0–2700 RPM/0–3300 BPM
MAX. TORQUE 145 ft-lb
ON-BOARD WORK LIGHT LED
BATTERY 20V max* (2.0 Ah) lithium-ion
REPLACEMENT BATTERIES 054-3203-2 (2.0 Ah); 054-3206-6(4.0 Ah)
CHARGER 35-minute, diagnostic
COMPATIBLE MAXIMUM CHARGER 054-3204-0
OPTIMUM CHARGING
TEMPERATURE
50 to 86°F (10–30°C)
DIMENSIONS 6 5/16 x 7 13/32 x 2 11/16”
(160 x 188 x 68 mm)
WEIGHT 2 lb 5 oz (1.06 kg) without battery
*Maximum battery voltage without workload; with workload nominal voltage is 18V.
TECHNICAL SPECIFICATIONS
• Before operating this tool, carefully read this
Instruction Manual and all of the labels affixed to the
tool. Failure to follow all warnings and instructions may
result in electric shock, fire and/or serious injury.
• The term “power tool” in the warnings refers to
your main operated (corded) power tool or battery
operated (cordless) power tool.
• Save all warnings and instructions for future reference.
TE
CHNIC
AL SPE
CIFIC
A
TIONS
WARNING!
• Before operating this tool, carefully read this
instruction manual and all of the labels affixed to the
tool. Failure to follow all warnings and instructions may
result in electric shock, fire and/or serious injury.
• The term “power tool” in the warnings refers to
your mains operated (corded) power tool or battery
operated (cordless) power tool.
• Save all warnings and instructions for future reference.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents. Rags,
clothes, cords, strings and similar items should never be left around the work area.
• Do not operate power tools in explosive environments, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks, which may ignite
the dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions
can cause the operator to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adaptor plugs with grounded power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep the cord away from heat, oil, sharp edges or moving
parts.
Replace damaged cords immediately. Damaged or tangled cords increase the
risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) or ground fault circuit interrupter (GFCI) protected
supply.
Use of an RCD or GFCI reduces the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a
power tool. DO NOT use a power tool while you are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.