background image

model no. 054-3245-2  |  contact us 1-888-670-6682

8

9

TM

SAFETY INSTRUCTIONS FOR BATTERY PACK AND CHARGER

•     If the battery pack casing is cracked or damaged, do not insert into charger. 

There is a danger of electric shock or electrocution.

•     Don’t allow any liquid to get inside charger.

 Electric shock may result. To 

facilitate cooling of the battery pack after use, avoid placing the charger or battery 
pack in a warm environment such as in a metal shed, or a trailer that is not insulated.

•     This charger is not intended for any uses other than charging rechargeable 

batteries.

 Any other use may result in risk of fire, electric shock or electrocution.

•     Do not place any object on top of the charger or place the charger on a soft 

surface that may result in excessive internal heat. 

Do not place the charger near 

any heat source.

•     To reduce the potential risk of damage to the electric plug and cord, 

pull by the 

plug rather than the cord when disconnecting the charger from the power supply.

•     Make sure the cord is located so it will not be stepped on, tripped over, or 

otherwise subjected to damage or stress.

•     An extension cord should not be used unless absolutely necessary. 

Use of an 

improper extension cord could result in a risk of fire, electric shock or electrocution.

•     Do not operate the charger if it has received a sharp blow, been dropped or 

otherwise damaged in any way.

•     Do not disassemble charger. 

Take it to an authorized repair facility when service 

or repair is required. Incorrect reassembly may result in a risk of electric shock, 
electrocution or fire.

•     To prevent the risk of electric shock, unplug the charger from the outlet before 

attempting to clean it.

 Only removing the battery pack from the charger will not 

reduce this risk.

•     DO NOT

 store or use the tool and battery pack in locations where the temperature 

may reach or exceed 122°F (50°C), which can lead to deterioration of the storage 
battery.

•     The charger is designed to operate on standard household electrical power 

(120 V AC).

 Do not attempt to use it on any other voltage.

ADDITIONAL INFORMATION ON BATTERY AND CHARGER

•     The battery pack is not fully charged out of the carton. First read the safety 

instructions and then follow the charging notes and procedures.

•     The longest life and best performance can be obtained if the battery pack is 

charged when the air temperature is 59–77°F (15–25°C). Do not charge the battery 
pack where the air temperature is below 32°F (0°C) or above 113°F (45°C). This is 
important and will prevent damage to the battery pack.

•     Do not incinerate the battery pack even if it is seriously damaged or is completely 

worn out. The battery can explode in a fire.

•     Never attempt to open the battery pack for any reason. If the plastic housing of the 

battery pack breaks or cracks, immediately discontinue use and do not recharge.

•     The length of service from your battery will depend on the type of work you 

are doing. The battery has been designed to provide maximum trouble-free life. 
However, like all batteries, it will eventually wear out.

•     To obtain the longest possible battery life, we suggest the following:

Store and charge your battery in a cool area. Temperatures above or below 
normal room temperature will shorten battery life.

-     Never store the battery in a discharged condition. Recharge it immediately after 

it has been discharged.

•     All batteries gradually lose their charge. The higher the temperature, the quicker 

they lose their charge. If you store your tool for long periods of time without use, 
recharge the battery every month or two. This practice will prolong battery life.

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries properly. This 
product contains a lithium-ion battery. Local, provincial or federal laws may prohibit 
disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for 
information regarding available recycling and/or disposal options.

S

AFETY INS

TRUCTIONS 

IMPORT

ANT INFORMA

TION

WARNING!

This manual contains important safety and operating 
instructions for your battery and charger. Before using the 
charger, read all instructions and warnings on the charger, 
the battery pack and the tool.

WARNING!

Upon removal, cover the battery pack’s terminals with 
heavy-duty adhesive tape. Do not attempt to destroy or 
disassemble.

Содержание 054-3245-2













Отзывы: