3
5
Adjustments
release handle clamp
Tighten the Adjustment bolt until desired result is achieved.
The release handle clamp has been factory adjusted and
SHOULD NOT
need any adjustment.
IMPORTANT:
The
red handle MUST BE FIRMLY secure in the
HORIZONTAL position
.
NOTE:
When limit tabs are already set and the release handle is put
back in the secure position but the gate is
NOT
in the full open or close
position, the operator will
automatically
re-align the gate’s open and
close tabs.
No readjustment is necessary
.
After Release Handle Clamp is in the SECURE HORIZONTAL
position:
Pull the arm.
NO slippage should occur.
If it does, readjust.
Adjustment
Bolt
factory set bolt
DO NOT adjust
adj
ust
bo
lt
for
firm
grip
Arm
Adjustment:
Re-Attach to Operator:
Limit Pin
Limit Tabs
Slot
Release Handle Clamp
Limit pin
MUST
fit into slot in bottom of
release handle clamp
directly under the
arm
when reattaching arm to operator.
IMPORTANT:
The arm
MUST
NOT
slip
when the gate is cycling or the gate
OPEN
and
CLOSE
limit positions will
NOT
be
LEARNED
. Gate speed will remain slow if
gate positions are
NOT
learned.
Release Handle Clamp
MUST
be
HORIZONTAL
when
FIRMLY
secured.
NO
