6
SprayMate HVLP ST610 TNT
US
4. Connect the front part of the gun and the
gun handle to each other. (Fig. 2)
5. Mount the air hose (Fig. 3, a + b).
6. Place the turbine only on a clean, flat
horizontal surface. Otherwise, the device
may suck in dust, etc.
7. Press the ON/OFF switch at the turbine.
(Fig. 4)
10. Operation
How the Spray Tanning system is handled,
including preparation of the work place
and spray tanning solution as well as the
final result, is the sole responsibility of
the operator.
MaxiMist Tanning Systems excludes any
liability for damage which may arise from
overspray, applica-tion errors, touch-ups,
or non-compliance with the instructions
provided here.
•
Turn the material control (Fig. 5, 1), in
order to adjust the desired delivery rate.
lower material volume (-):
turn anti-clockwise
higher material volume (+):
turn clockwise
Your goal is a 4 inch wide spray
pattern spraying 4 inches away.
•
Turn the air cap (Fig. 6, 1) with the union
nut (2) slightly unscrewed, to adjust the
shape of the spray jet:
Fig. 7a vertical flat jet:
For spray movements from left to
right
Fig. 7b horizontal flat jet:
For spray movements from top to
bottom
•
Pull the trigger to spray the tanning
solution.
2
➟
3
a
b
➟
4
5
1
