26
detergents for this, but just warm water. When the scraps are not removed, it may
block the washing and rinsing arms or the drain filter.
After closing the door, press the washing starter key to start the automatic washing
cycle. This will take 102 seconds, 85 seconds to wash, 2 seconds to dispose of
detergent and 15 seconds to rinse. All of the fases in the washing programs will be
executed automatically after pressing the washing button (next to the on/off button,
left on the panel).
At the end of a washing program you have to let the dishes cooldown for 30
seconds before touching them. This is to prevent any burns.
After placing a new basket of dishes and closing the door, the machine will restart
the program as long as the washing button (next to the on/off button) is still pushed
in.
Removing the water in the tank of the VNG350 can be done by removing the plug
from the drain pipe/filter. The machine will empty automatically. When using the
VNG350 Ultra you should remove the drain pipe while the machine is still on. After
doing so shut the machine down. This will activate the drain pump which will work
for 3 minutes and then stop automatically.
Caution:
The machine must be installed and used as described in this user manual.
If you are experiencing problems or damage occurs, contact the transporter or
dealer.
When the machine has a failure, only authorized service dealers are allowed
to handle the device. If any person other than only authorized service dealers
handle the device, it will not be covered by the warranty.
The manufacturer/importer will not take responsibility for any
problems/consequences caused by unauthorized personnel, and third parties
handling the machine. During maintenance, only original spare parts should
be used. When not using original spare parts, the machine is also no longer
covered by the warranty.
CLEAN-UP AND MAINTENANCE
