Maxim MT PRO Series, Руководство пользователя

Страница: 11 / 36

RMT55H
20195 South Diamond Lake Road, STE 100
Rogers, MN 55374
800.621-2789
11
cause nausea, fainting or death, in addition to drowsiness, dizziness and confusion. If you
experience any of these symptoms, seek fresh air and medical attention immediately.
PREVENTING CARBON MONOXIDE POSIONING
• Always start and run engine outdoors. Do not start or run engine in an enclosed area,
even if doors or windows are open.
•
Never try to ventilate engine exhaust indoors. Carbon monoxide can reach dangerous
levels very quickly.
• Never run engine outdoors where exhaust fumes may be pulled into a building.
•
Never run engine outdoors in a poorly ventilated area where the exhaust fumes may be
trapped and not easily taken away. (Examples include: in a large hole or areas where hills
surround your working area.)
• Never run engine in an enclosed or partially enclosed area. (Examples include: buildings
that are enclosed on one or more sides, under tents, car ports or basements.)
•
Always run the engine with the exhaust pointed in the direction away from the operator.
• Never point the exhaust towards anyone. People should always be a minimum of ten feet
away from the operation of the engine and its attachments.
•
Do not change the engine governor settings or over-speed the engine.
⚠
WARNING
E
NGINES GIVE OFF CARBON MONOXIDE
,
AN ODORLESS
,
COLORLESS
,
POISONOUS GAS
. C
ARBON MONOXIDE
MAY BE PRESENT EVEN IF YOU DO NOT SMELL OR SEE ANY ENGINE EXHAUST
. B
REATHING CARBON
MONOXIDE CAN CAUSE NAUSEA
,
FAINTING OR DEATH
,
IN ADDITION TO DROWSINESS
,
DIZZINESS AND
CONFUSION
.
I
F YOU EXPERIENCE ANY OF THESE SYMPTOMS
,
SEEK FRESH AIR AND MEDICAL ATTENTION IMMEDIATELY
.
⚠
CAUTION
HOT GASES ARE A NORMAL BY
-
PRODUCT OF A FUNCTIONING INTERNAL COMBUSTION ENGINE
.
FOLLOW
ALL SAFETY INSTRUCTIONS TO PREVENT BURNS AND FIRES
.
DO NOT ALTER
/
MODIFY ENGINE
:
NEVER ALTER OR MODIFY THE ENGINE FROM THE FACTORY
.
SERIOUS INJURY OR DEATH MAY OCCUR IF
ENGINE IS MODIFIED OR ALTERED
.
WHEN WORKING ON OR REPLACING PARTS FOR THE ENGINE OR PRODUCT
,
YOU MUST ALWAYS FLIP THE
ON
/
OFF SWITCH TO THE OFF POSITION
.