USER'S MANUAL
USER'S MANUAL
Chapter 4 Roll paper installing
A
B
C
D
Incorrect Correct
4-1. Installing or Replacing the Roll Paper
1. Make sure that the printer is not receiving data; otherwise, data may be
lost.
2. Grasp the two sides of the paper cabin cover and pull till the cover open.
3. Remove the used paper roll core if there is any.
4. Put in a new paper roll as shown.
5. Be sure the correct direction of the paper comes off the roll.
6. Pull out a small amount of paper, then close the cover. As picture shows.
Turn off the printer, open the paper roll cover, and clean the thermal elements
of the print head with a cotton swab moistened with an alcohol solvent
(ethanol, methanol, or IPA).
Recommend to clean the thermal head periodically (generally every three
months) to maintain receipt print quality.
4-2. Cleaning the Print Head
NOTE: After printing, the print head can be very hot. Be careful not to
touch it and to let it cool before you clean it. Do not damage the print
head by touching it with your fingers or any other hard object.
