USER'S MANUAL
USER'S MANUAL
This printable area for this printer is approximately 72.2 mm
{512/180"}in the horizontal direction and approximately 117.3 mm
{1662/360"} in the vertical direction.
XL = xH = y L = yH = 0
dxL = 0, dxH = 2, dyL = 126, dyH = 6
[Default]
ESC X n
[Name]
[Format]
[Range]
[Description]
Select character Double-width mode
ASCII ESC X n
Hex 1B 58 n
Decimal 27 88 n
1
n
8
Select character Double-width mode.
ESC j n
[Name]
[Format]
[Range]
[Description]
[Details]
Print and feed paper
ASCII ESC j n
Hex 1B 6A n
Decimal 27 106 n
0
n
255
Prints the data in the print buffer and feed the paper [n x vertical or
horizontal motion unit].
After printing is completed, this command sets the print starting
position to the beginning of the line.
The paper feed amount set by this command does not affect the
values set by
ESC 2
or
ESC 3
.
In standard mode, the printer uses the vertical motion unit (y).
The maximum line spacing is 1016mm {40"}. When the setting
value exceeds the maximum, it is converted to the maximum
automatically.
FS SO
[Name]
[Format]
[Description]
Select character Double-width print mode
ASCII FS SO
Hex 1C 0E
Decimal 28 14
Select character Double-width print mode
This order can be canceled by FS,DC4,LF order.
FS DC 4
[Name]
[Format]
[Description]
Cancel character Double width print selection
ASCII FS DC4
Hex 1C 14
Decimal 28 20
This order can cancel character Double-width print mode set by
FS, SO.
FS ! n
[Name]
[Format]
[Range] 0<n <255
[Description] Select print modes using n as follows
Select character print mode
ASCII FS ! n
Hex 1C 21 n
Decimal 28 33 n
If n is in the range of defination ,this order can be neglected.When
both double -height and double-width modes are selected, characters
are printed simultaneously
[Default] n=0.
GS n1 n2 d1...d(n1 x n2 x 8)
[Name]
[Format]
[Range]
[Description]
[Details]
Define downloaded bit image
ASCII GS * n1 n2 d1...d(n1 x n2 x 8)
Hex 1D 2A n1 n2 d1...d(n1 x n2 x 8)
Decimal 29 42 n1 n2 d1...d(n1 x n2 x 8)
1
n1 255, 1 n2 48, n1 x n2 1536 , 0
d 255
Defines a downloaded bit image using the number of dots
specified by n1 and n2
-n1 specifies the number of dots in the horizontal direction.
-N2 specifies the number of dots in the vertical direction.
The number of dots in the horizontal direction is n1 x 8, in the
vertical direction it is n2 x 8.
If n1 x n2 is out of the specified range, this command is disabled.
The d indicates bit-image data. Data (d) specifies a bit printed to 1
and not printed to 0.
The downloaded bit image definition is cleared when:
1. ESC @ is executed.
2. Printer is reset or the power is turned off.
The following figure shows the relationship between the
downloaded bit image and the printed data.
Function
Bit
0
1
2
3
4
5
6
7
Off/On
-
On
On
--
--
--
-
Hex
-
4
8
-
-
-
-
Decimal
-
4
8
-
-
-
-
Default font
Undefined
Double-height mode selected
Double-width mode not selected
Undefined
Undefined
Undefined
Undefined
