USER'S MANUAL
USER'S MANUAL
Chapter 7 Basic operations
7-1. Power on/off
Press on the POWER button and hold on for more than 3 seconds. The printer
will be powered on if the pre-statue is off; and the priner will be powered
off if the pre-statue is on.
Be sure the printer is powered on before printing. If the printer will not be
used for a long time, do please power it off to save battery power.
7-2. Feed paper
This printer can feed paper manually.
Press the FEED button once to advance paper one line. Press the FEED
button and hold on to feed paper continuously.
7-3. Tear paper
After finished printing every receipt, users need to tear off the receipt by
themselves. There is a sawtooth architecture for tearing. Pay special notice
to tearing angle and force , over force may results in roll paper being pulled
out from the paper cabin.
Chapter 8 Alarming to lack of paper
This printer can detect paper lacking.
When the printer run out of paper, the ERROR indicator light will turn yellow.
If the paper runs over when printing, the data in the printer buffer won't be
cleaned. The printing will go on after the paper loaded.
