background image

P R E F A C E  

A B O U T   T H I S   G U I D E  

 

 

Product User Guide 

5

Use only the specified AC adaptor with this product: using an AC adaptor other than the supplied one may damage the product or result in fire. 
Do not use the AC adaptor if it was exposed to strong impact: Strong impact may damage the AC adaptor which might result in short circuit, 
electric shock, or fire if used. 
Do not expose the product to excessive high temperatures or leave it in high temperature environments for a long period of time: 
excessively exposing the product near fire or direct sunlight for extended periods may damage the product and cause trouble with internal parts. 
Using a damaged device may result in fire or electric shock. 
Close the connector and card reader covers tightly when using this product in wet, moisture, steam, dust, oily vapour, etc. conditions: If 
such matter enters the device, it may cause fire or electric shock.  If it occurred, turn the device power off, unplug the AC, remove the battery and 
contact your technical support office. 
Keep SD memory cards away from infants and small children: accidental swallowing may result in bodily injury. 
Use the supplied stylus to touch the screen: do not press down on the on display with sharp-pointed or hard objects that may leave marks or 
damage the display (e.g. pencils, ball point pen, nails, etc.) 
If not using the device: turn the device of to optimize power consumption and battery life. 
Use the stylus only for touching the screen: using it for other purposes may damage the stylus and result in scratches on the screen. 
When carrying the iDLMax:  Remove all external devices and cables and close all rubber covers.  
Switch off by shutting down the iDLMax: before boarding an aircraft.  Ensure it cannot be switched on inadvertently. 
Switch off by shutting down the iDLMax: when and where the use of mobile devices are prohibited in public places and sensitive areas (e.g. in 
hospitals or other health care facilities)  
Avoid stacking the product: if it fall over or drop, injury could result.  
 
  
  
 
  

 

Содержание iDLMax























































Отзывы: