Maxi-Cosi 8515510110, Руководство пользователя

Страница: 68 / 126

68
I
Mica Pro Eco i-Size 40 cm-105 cm / 18 kg
I
Maxi-Cosi
SAFETY
• The Mica Pro Eco i-Size is intended for car
use only.
• The Mica Pro Eco i-Size is developed for an
intensive use of approximately 12 years.
• Do not use any load bearing contact points
other than those described in the instructions
and marked in the child restraint.
• Do not leave your child unattended in the car.
With an outside temperature of 20 degrees
the car interior heats up in 20 minutes to
40 degrees Celsius which causes a risk.
To prevent risk of overheating consider a Child
reminder device e.g. Maxi-Cosi e-Safety inlay
cushion.
The Mica Pro Eco i-Size car seat in the car:
• The car seat can be rotated 360° to help you
get your child in and out of the vehicle easily.
This also allows you to change the position of
the seat from rearward facing to forward facing.
• Before buying this product make sure the car
seat is compatible with the vehicle it is to be
used in.
• The car seat must be installed with ISOFIX and
support leg.
• The support leg must always be unfolded
completely, locked and placed in the most
forward position.
• When the child restraint is installed in the
maximum rearward facing position, it may not
fit in all approved vehicles. Please check that all
possible positions of the car seat (recline
positions and headrest adjustment) fit in your car.
Your child in the Mica Pro Eco i-Size
car seat
• The newborn inlay included in your Mica Pro
Eco i-Size seat is exclusively for use with the
Mica Pro Eco i-Size and plays an integral part in
the safety of the restraint system for your child
from 40 to 60 cm. The newborn inlay is
removable and the cover can be taken off for
washing; it is essential to place it back again
where it belongs and only use this official
Maxi-Cosi Mica Pro Eco i-Size newborn inlay.
EN
A - Seat cover
B - Adjustable headrest
C - Newborn inlay - exclusively for use with
Mica Pro Eco i-Size from 40 to 60 cm
D - Removable shoulder and lap pads
E - 5-point Harness
F - Harness buckle
G - Harness adjuster button
H - Rotation handle
I - Harness adjuster strap
J - Recline handle
K - Rearward/Forward facing selector button
L - Support leg
M - Support leg adjuster button
N - Support leg height adjustment rack
O - Support leg indicator
P - G-CELL Side Protection System
Q - ClimaFlow Air ventilation
R - ISOFIX connectors
S - ISOFIX connectors release button
T - Headrest adjustment handle
U - Manual storage