Copyright 2015 by Maxford USA
Page
6
RUMPLER TAUBE / Doc. Nbr. S160113
3.
Optional items you may choose to add
Scale Mercedes 4-cylinder inline dummy engine.
(NOTE: The dummy engine may not fit a glow-
engine setup.)
Vintage-style 3-inch spoked wheels.
(NOTE: This ARF comes with wooden wheels.
Learn about Maxford USA vintage-style spoked
wheels at
http://www.maxfordusa.com/vintagestyle3spokedwheels.aspx
Maxford USA scale pilot figures (shown at far right).
Servo extension safety clips.
Firewall for optional glow-engine setup.
VII. ASSEMBLY INSTRUCTIONS
A.
SIMULATED RADIATORS & PILOT’S CONTROL STICK
1.
Attach a simulated radiator to each side of the fuselage.
2.
Select option 1 or option 2 described below to
attach an approx. 26-inch (66 cm) long cable to the
holes in the upper end of the pilot’s control stick.
(NOTE: If necessary, review page 3 for how to use a
crimp tube.)
NOTE:
3.
Align the control stick’s mounting holes
with the predrilled holes in the floor of
the fuselage. Secure the control stick to
the fuselage with 2 mm bolts, nuts and
threadlock compound.
Simulated radiator attached with
1 cm (
3/8
-inch)
wood screws.
2 mm bolts and nuts.
Guide the cable into
the fuselage and out
through the
slotted opening
shown below.
