Copyright 2015 by Maxford USA
Page
4
RUMPLER TAUBE / Doc. Nbr. S160113
c.
Hold one end of the surface between your knees and twist the other end a little bit further than
needed. This will cause wrinkles in the covering material. While holding the twist in place, use a heat
gun or covering iron to re-tighten the covering material.
d.
Repeat until you have it straight. (Actually, you want 2-4 mm of washout in both the left and right
panels of most wings; take care to make both left- and right-side panels the same.)
29.
Read the tips on our Website at
http://www.maxfordusa.com/brushlessmotorandcontroller.aspx
such instructions included with your motor, electric speed control, battery and charger. Failure to
carefully consider and follow these instructions may result in permanent damage to your model airplane,
its electric power system, their surroundings, and possible bodily harm! If you crash this model airplane,
carefully check whether your battery is damaged. Do NOT attempt to use or recharge a damaged battery.
II. PREFLIGHT & AFTER-FLIGHT CHECKS (
FOR YOUR SAFETY, EVERY TIME YOU FLY)
1.
Double-check the security of the motor-mounting box, motor or glow engine. Ensure that any hatch(es),
installed dummy engine and pilot figure(s) and any added nose weight all remain secure.
2.
Check that the landing gear remains attached securely and functions smoothly.
3.
Make certain all screws, clevises and other connections throughout the air frame are secure.
4.
Double-check the control cables, control directions and amount of control throw. Do not attempt to fly
with a frayed or damaged control cable.
5.
As with all radio-controlled model airplanes, this model must pass the radio range ground check
recommended by your radio’s manufacturer or you may not fly safely.
6.
We suggest you make a habit of setting your transmitter’s throttle control safely to minimum before
turning ON your transmitter. Carefully setup and operate your radio-control and power systems
according to their manufacturer’s instructions and follow the guidelines and hints offered by the
Academy of Model Aeronautics, your local R/C club, and concerned manufacturers wishing to help
ensure your safe enjoyment of this hobby.
III. LIMITED WARRANTY, LIABILITY WAIVER & RETURN POLICY
Maxford USA guarantees this kit to be free from defects in material and workmanship at the time of
purchase. Our products have been inspected in our factory and are checked again when shipped from
our warehouse. However, Maxford USA cannot directly control the materials you may use or your final
assembly process. Therefore, Maxford USA cannot in any way guarantee the performance of your
finished model airplane. Furthermore, in purchasing this product, you (the buyer or user of this product)
exempt, waive, and relieve Maxford USA from all current or future liability for any personal injury,
property damage, or wrongful death, and if you (the buyer or user of this product) are involved in any
claim or suit, you will not sue Maxford USA or any of its representatives.
If you do not fully accept the above liability and waiver, you may request a return-merchandise
authorization number (RMA#) as explained in item 2 on the following page. If you think there is a
missing, damaged or unsatisfactory part, please read the following after-sales service and return policy
and instructions:
1.
Inspect your order upon delivery for any missing, damaged or unsatisfactory part(s). If you believe
there is a problem, you must call us at 562-529-3988 (Monday through Friday except holidays,
between the hours of 9 AM and 5 PM Pacific time) before you begin assembly and within 10 days
from receipt of your purchase. During this telephone conversation, and with your support, we will
determine how to resolve your concern.
2.
To request a return-merchandise authorization number (RMA#), call 562-529-3988 (Monday
through Friday except holidays, between the hours of 9 AM and 5 PM Pacific Time). If we elect to
issue you an RMA#, you must clearly mark this RMA# on the outside of the package. (No return or
exchange will be authorized after 10 days from the date of your receipt of the product; any package
delivered to us without a Maxford USA RMA# is subject to being returned to the sender, as received,
with return postage payable upon delivery.) Returned merchandise must be in its original condition
as received from Maxford USA, with no assembly or modification, in the product’s original packing
materials, complete with any included manuals and/or accessories. Return shipping and insurance
charges must be prepaid by you, the buyer.
