S110908 Mentor-G V2
III. SPECIFICATIONS*:
Wingspan ................................................................................................................................ 83-inches
Wing Area ..................................................................................................................... 1,187 sq. inches
Length ..................................................................................................................................... 60 inches
ARF weight ........................................................................................................................... 6.6 pounds
Flying weight (including fuel) ............................................................................................ 11.6 pounds
Engine (Not included) .................................... CRRC 26i or equivalent 26CC-class 2-cycle gas engine
Propeller (Not included) ...................... 18x6 or 16x10 wood
(or as-recommended for your engine)
Radio system (Not included) ................................ Minimum of 4 channels with 5 or 6 standard servos
(Recommended servos: Hitec HS-311 or equivalent)
*
(All dimensions and weights are approximate.)
IV. FEATURES OF V2
NEW/IMPROVED FEATURES …
•
All control surfaces have been enlarged and may be setup
for more ‘aerobatic’ performance.
•
Pin-lock hatch.
•
New-designed aluminum landing gear.
•
Optional floats.
•
Optional drop box.
SPECIAL FEATURES …
•
The firewall has predrilled holes for a CRRC 26i gas engine.
•
The firewall and most of the fuselage is plywood; the wings and
empennage are mostly balsa.
•
The ailerons are operated by separate servos for optional use as flaperons.
•
The elevator may easily be setup for two-servo operation.
•
Default setup and hardware are for tail-dragger configuration. If tricycle
landing gear is preferred, the builder may mount the main landing gear struts in alternate predrilled
holes, add an extra layer of plywood, some blind nuts, a nose wheel, a nose-wheel steering servo and
related linkages (these optional items are not included).
V. PARTS LIST:
1. Items you must supply to complete the M
ENTOR
-G
•
5-minute epoxy glues, Cyanoacrylate (CA) adhesives, masking tape, a high-speed rotary tool and a
few common hand tools (such as long-nosed and diagonal or side-cutter pliers, etc.).
•
26 CC gas engine
.
•
18x6 or 16x10 propeller (or as-recommended for your engine) and optional spinner.
•
Minimum of five(5)
Hitec HS-311
or equivalent standard-sized servos, four(4) 12-inch extensions,
one(1) 12-inch Y-connector, and a 4-channel radio control system.
2. Items included with your Mentor-G
•
Precovered fuselage, wing panels, vertical and horizontal stabilizers, rudder and elevator.
•
Precut, precovered hatch, secured in position by an easy-to-operate pin-lock assembly.
•
Aileron, rudder and elevator pushrods and related linkages with precut hinge openings and all required
CA hinges.
•
Wooden mount for throttle servo and pushrod for throttle control.
•
Tail wheel with steerable wire strut assembly.
Page 3 of 10
