background image

Page 

4

 of 

13

 

 

WARRANTY, LIABILITY WAIVER, AND RETURN POLICY 

Maxford USA guarantees this kit to be free from defects in material and workmanship at the time 
of purchase. All of our products have been inspected in our factory and are checked again when 
shipped from our warehouse. 

However, Maxford USA cannot directly control the materials you may use nor your final-
assembly process. Therefore, Maxford USA can NOT in any way guarantee the performance of 
your finished model airplane. Furthermore, in purchasing this product, you (the buyer or user of 
this product) exempt, waive, and relieve Maxford USA from all current or future liability for any 
personal injury, property damage, or wrongful death, and if you (the buyer or user of this 
product) are involved in any claim or suit, you will not sue Maxford USA or any of its 
representatives. 

If you do not fully accept the above liability and waiver, you may request a return merchandise 
authorization number (RMA#) as explained in item 2, below. 

If you think there is a missing part or any shipping damage, please read our after-sales service 
and return policy as outlined below. 

1. 

Inspect your order upon delivery for any shipping damage or missing part. If you find a 

problem you must contact us within 10 days from receipt of your purchase by calling (562) 
529-3988, Monday through Friday, except holidays, between the hours of 8:30 AM and 5 PM 
Pacific time. During this telephone conversation, and with your support, we will determine 
how to resolve your concern. (NOTE: Maxford USA Li-Po batteries are sold without warranty 
and are not eligible for return or credit.) 

2. 

To request an RMA#, call (562) 529-3988, Monday through Friday, except holidays, 

between the hours of 8:30 AM to 5 PM Pacific time. If we elect to issue you an RMA#, you 
must clearly mark this RMA# on the outside of the package. (No return or exchange will be 
authorized after 10 days from the date of your receipt of the product; any package delivered 
to us without a Maxford USA RMA# is subject to being returned to the sender, as received, 
with return postage payable upon delivery.) Returned merchandise must be in its original 
condition as received from Maxford USA, with no assembly or modification, in the original 
packing materials, complete with all manuals and accessories. Return shipping and 
insurance charges must be prepaid by you, the buyer. 

3. 

Returned merchandise that is accepted by Maxford USA for credit is subject to a 10% to 

20% restocking fee (the final amount will be determined by Maxford USA upon receipt and 
examination of the returned merchandise). 

 

Return Address: 

Maxford USA Distribution Inc. 
15939 Illinois Ave., #C 
Paramount, CA 90723 

 

 IMPORTANT:

  Print the RMA# issued by Maxford USA on the package near the above address. 

SPECIAL FEATURES OF THIS HUGHES H-1 

  Fits full assembled in most vehicles. 

  All assemblies are precovered and required openings are predrilled and/or precut. 

  The cowl and tail fairings are prefinished. 

  Each aileron is separately operated by its own servo. 

 

True to scale stick-on markings.

 

 

Large hatch provides easy access to the battery and radio equipment.

 


 
 

Содержание Hughes H-1 V2














Отзывы: