background image

Page 

2

 of 

13

 

 

HISTORY 

 

This is a scale model of the famous Howard Hughes H-1 from the Golden Age of 
Aviation, the 20 year period between the end of World War I and the beginning of World 
War II.  Though originally designed  simply for speed, the H-1 had many new features 
that influenced the design of high- performance aircraft for years, including  retractable 
landing gear, gently curving wing fillets, rivets and joints that were flush with the 
aircraft's skin, and ailerons that could be drooped when the flaps were fully extended, 
improving lift along the full length of the wing  for takeoffs and landings. 
 
The original H-1 is now on display in the Golden Age of Flight gallery in the Smithsonian 
National Air and Space Museum. 
 

                         

 

 

The 1st version of Maxford USA H-1 was released after nearly 2 years in development 
and true to the original design, it is stable at both low and high speeds, features 
concealed rudder and elevator controls, the new developed Max Cowling fiberglass 
cowl, magnetic battery hatch, spring loaded tail wheel and optional retractable landing 
gear.  
 
Version 2 is the new improved version make this unique ARF even better than the 1st 
version and now the retracts are included and fully installed. 

IMPORTANT SAFETY PRECAUTIONS 

TO PROTECT YOUR MODEL, YOURSELF & OTHERS 

1.  This product should not be considered a toy, but rather a sophisticated, working model that 

functions much like a full-scale airplane. Because of its performance capabilities, this 
product, if not assembled and operated correctly, could cause injury to you or spectators and 
damage to property. Maxford USA provides you with a high-quality, thoroughly tested model 
airplane kit with assembly instructions. However, the quality and capabilities of your finished 
model airplane depend on how you build it, and your safety depends on how you use and fly 
it. Any testing or flying of this model airplane is done entirely at your own risk. 

2.  Assemble the model airplane according to these instructions. We recommend that you do 

not alter or modify the model, as doing so may result in an unsafe or unworkable model. In a 

Содержание Hughes H-1 V2














Отзывы: