Page
18
of 18
Copyright 2015 – PT17 / S150209
2.
To reinstall the wings:
a)
Remove and set aside the 4 Maxlok pins.
b)
Carefully align and slide each set of left and right wing panels toward each other on their wing joiners.
c)
Reconnect the aileron extensions to the aileron‟s Y-cable, reattach the servo extension
safety clips and neatly dress the wires inside the wing or fuselage.
d)
Position the Maxlok pins into their openings in the upper
wing‟s center section and the fuselage – and double-check to
ensure the magnets are holding the Maxlok pins in position.
(NOTE: The longer pair of Maxlok pins belong in the bottom
of the fuselage; insert the shorter pair of Maxlok pins into the
bottom of the top wing‟s center section.)
e)
If you have wing-wire anchor points attached to the fuselage,
reattach the wing-wire clevises to the end of the spring
attached to each side of the fuselage.
IX. PRE-FLIGHT CHECKS
1.
Double-check the security of the motor- (or engine-) mounting box to the fuselage.
2.
Make certain all clevises, horns, nuts, bolts, screws and other connected parts throughout the air frame and landing gear
are secure.
3.
Double-check for correct control directions and smooth operation of the throttle, ailerons, elevator and rudder.
4.
Get into the habit of moving your transmitter‟s throttle to minimum before turning ON your transmitter. Carefully break-in
and operate your engine (or electric power system) according to the manufacturer‟s instructions.
5.
As with all radio-controlled model airplanes, this model must pass the radio range ground check recommended by your
radio‟s manufacturer, or you may not safely fly.
6.
For your safety and for the safety of those around you, perform a final pre-flight check of all connections and clevises.
7.
Carefully perform whatever additional preflight safety checks you or your club may think are necessary.
HAPPY LANDINGS!
REMINDER:
An important notice to our customers –
T
H I S P R O D U C T I S
N O T
A T O Y
.
PLEASE ENJOY YOUR HOBBY AND FLY SAFELY!
Designed by:
Maxford USA RC Model Mfg., Inc.
Distributed by:
Maxford USA RC Model Distribution, Inc.
15939 Illinois Avenue #C
Telephone (voice) ............. (562) 529-3988
Paramount, CA 90723
Fax .................................... (562) 529-6988
Toll free (orders only) ...... (866) 706-8288
Website …………..
www.maxfordusa.com
Order replacem ent parts, s er vos, batteri es, gas engin es , brus hless m otors,
el ect roni c s peed con trols, and a w ide var iet y of other high -qu ality
RC hobby item s on li ne at
www.m axfordusa.com
