maxem Maxem 5, Руководство по установке

Страница: 21 / 28

21
EN
05 - Commissioning by installer
Without proper commissioning Maxem is unable to send a current limiting value
to the charging station. This results in OVER CURRENT OF THE GRID CONNECTION.
Therefore always make sure this step is successful.
Turn on the charging station or restart it by taking off the current for 30 sec. and
putting it back on. Wait at least 1 minute for the charging station to start up. This way
you know that the charging station has fully started up.
Connect the 230V power supply to Maxem. A.
B.
Maxem has to be configured online by the installer in order to be commissioned.
For this go to the (mobile) website:
https://install.maxem.io
D.
In case of problems during commissioning, you can contact Maxem support:
+31 20 7708 713
Input: 110 - 240V ~ 0,5A
50/60Hz Max 2,75W
Serial number:
CAT III
Made in The Netherlands.
Registration key:
8 719326 026800
MX4-1-H-000000
0000
Serial number
Registration key
Serial number and registration key can be found on the back side of Maxem.
Wait until the first 3 status LED’s on Maxem are green. This means that Maxem is
connected to the network, the internet and the data cloud.
C.