MAXDATA VISION 350M, Руководство пользователя

Страница: 60 / 373

5-6
USER`S MANUAL
The hard disk performs pretty slow -
n
If you have been using the unit for a period, the files may be
fragmented. Go to [Start > Programs > Accessories >
System Tools > Disk Defragmenter] to perform a disk
defragment. This operation may take a while.
The files are corrupted -
n
Run the ScanDisk surface scan to check the platter. (This
function is available in Windows 95/98, but not Windows
NT). Go to [Start > Programs > Accessories > System
Tools > ScanDisk] to perform a disk surface scan. This
operation may take a while.
CD-ROM Problems
The CD-ROM drive does not work -
n
Try rebooting the system.
n
The CD-ROM driver is not loaded. Go to [Start > Settings >
Control Panel > System] and in the Device Manager see if
the CD-ROM driver is enabled. If you see a red cross or
yellow mark, there may have been a resource conflict. See
Windows on-line help or manual for more information.
n
After you have inserted a CD-ROM disk, it may take a
moment before you can access its content.
The CD-ROM drive dose not read any CDs -
n
The CD may not be properly seated in the tray. Have CD on
the tray and press the CD firmly onto the spindle, also make
the retaining clips held the CD in place.
Note:
There are two kind of types of CD-ROM might be installed as
shipped. One is electrical and the other is mechnical. Basically,
the mobile computor is equipped to electrical CD-ROM. With
this device, you can do the CD-ROM ejection only if the system
is on. As for bundling the mechnical type, the ejection button
works all the time, even the system is powered off. Please be
also noted, the mechnical one is not avaliable to eject the CD-
Disk by performing Fn key under the running Windows 98
operating system.