MAXDATA SR1202 M1, Руководство пользователя

Страница: 7 / 58

7 MAXDATA SR1202 M1 – Technical User Guide
1 Preface
Notices
The information in this document is subject to change without notice.
While every effort has been made to ensure that all information in this document is accurate, the
Authors accept no liability for any errors that may arise.
No part of this document may be transmitted or copied in any form, or by any means, for any purpose,
without the written permission of the Authors.
Acknowledgments
All names, brands, products or services are trademarks or registered trademarks of their respective
companies.
What is in this guide
This user guide gives you step-by-step instructions on how to install, configure and connect an SR1202
Enclosure Platform to your host computer system and how to use and maintain the system.
Who should use this guide
This user guide assumes that you have a working knowledge of the SAS-SATA environment into
which you are installing your SR1202 Enclosure Platform. If you do not have these skills, or are not
confident with the instructions in this guide, do not proceed with the installation.
International Standards
The SR1202 Enclosure Platform complies with the requirements of the following agencies and
standards:
• CE to EN 60950
• UL
• cUL
Potential for Radio Frequency Interference
USA Federal Communications Commission (FCC)

NOTE
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.