MAXDATA SR1202 M1, Руководство пользователя

Страница: 50 / 58

50 51 MAXDATA SR1202 M1 – Technical User Guide Troubleshooting and Problem Solving 50 51 MAXDATA SR1202 M1 – Technical User Guide Troubleshooting and Problem Solving
Figure 38. Cooling Module Installation
SR1202 RAID Controller Module
!
CAUTION
If only one SR1202 RAID Controller Module is fitted then a Blank module MUST be fitted in the unused
slot, there will be inadequate drive cooling if the slot is left open.
The following procedures apply to both the SR1202 RAID Controller Module and the Blank (SR1202)
module.
Removing an SR1202 RAID Controller Module
!
WARNING
Do not remove this module unless a replacement can be immediately added. The system must not
be run without all modules in place.
1. Using two hands, grasp each latch between the thumb and forefinger of each hand. Squeeze
thumb and forefinger together to release the latch.
2. Pull the latches outward to cam the module out of the enclosure (Figure 41).
3. Grip the latch handles and withdraw the module (Figure 39).