MAXDATA SR1202 M1 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 58

background image

30

31

MAXDATA SR1202 M1 – Technical User Guide

Getting Started

30

31

MAXDATA SR1202 M1 – Technical User Guide

Getting Started

30

Module Installation

The SR1202 enclosure is supplied fully populated with all plug-in modules installed. For information
on removal/replacement of plug-in modules, please refer to Chapter 5, ”Troubleshooting and Problem
Solving”, on page 39.

Management Interfaces

The following management interfaces are provided and used to configure, manage and monitor the
SR1202 RAID Controller Module Storage Solution.

StorView

®

Storage Management Software

StorView

®

Storage Management software is a full-featured graphical HTML-based software suite

designed to configure, manage and monitor the SR1202 RAID Controller Module Storage Solution.

StorView

®

provides the centralized local and remote management tool to control primary storage

assets vital to ensuring maximum data reliability, network up-time, and system serviceability. It also
allows you to manage and monitor the storage system from a host running StorView

®

locally and

from a web browser across the intranet or internet.

StorView

®

comprises the StorView

®

Server which runs as a background service and is responsible

for managing the installed modules.

The StorView

®

Server discovers system storage devices, manages and distributes message logs,

and communicates with other StorView

®

Servers installed on the same local and external subnet

networks.

A GUI provides the interface in an HTML-based front end which is accessed using a web browser.

The software incorporates a web server, Apache 2.0, that provides the interface between the StorView

®

Server and GUI. During installation the web server is automatically configured.

!

IMPORTANT

The embedded StorView module is installed on the SR1202 RAID Controller Module so the Storview

®

program is not required.

Please refer to the following documents:

• Quickstart Guide
• MAXDATA SR1202 M1 – StorView

®

RAID User Guide

RAID Conﬁguration Utility (Menu-based)

The SR1202 RAID Controller Module firmware based programs are accessed through a VT-100 terminal
using a menu-based RAID Configuration Utility interface.

RAID Conﬁguration Utility (Text-based)

The SR1202 RAID Controller Module firmware based programs are accessed through a VT-100 terminal
using a text-based RAID Configuration Utility interface.

«
...
28
29
30
31
32
...
»

Содержание SR1202 M1



























































Отзывы:

Нет отзывов

Похожие инструкции для SR1202 M1

Бренд: RaidSonic Страницы: 2

Бренд: Snell & Wilcox Страницы: 84

Бренд: AEONS Technologies Страницы: 12

Бренд: Panduit Страницы: 2

Бренд: SFF time Страницы: 31

Бренд: SICK Страницы: 34

Бренд: Minebea Intec Страницы: 24

TotalStorage FAStT EXP700

Бренд: IBM Страницы: 100

Бренд: Nanoxia Страницы: 15

Бренд: Macpower & Tytech Страницы: 18

Бренд: MAG Страницы: 53

PANZONE PZBASE3

Бренд: Panduit Страницы: 6

Бренд: Icy Box Страницы: 16

RITTAL HD 1302.500

Бренд: FRIEDHELM LOH Страницы: 36

Бренд: GAMDIAS Страницы: 19

Бренд: Panduit Страницы: 18

Бренд: Union Switch & Signal Страницы: 6

MIC-3038 Series

Бренд: Advantech Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды