MAXDATA SR1202 M1, Руководство пользователя

Страница: 29 / 58

28 29 MAXDATA SR1202 M1 – Technical User Guide Getting Started 28 29 MAXDATA SR1202 M1 – Technical User Guide Getting Started
Rack Mounting Rail Kit
A set of mounting rails is available for use in 19 inch rack cabinets (Figure 24). These rails have been
designed and tested to handle the maximum enclosure weight and to ensure that multiple SR1202
enclosures may be installed without loss of space within the rack. Use of other mounting hardware
may cause some loss of rack space.
The rack mounting rail kit also incorporates a rear hold down mechanism to ensure shock and vibration
immunity.
Please contact your supplier to ensure suitable mount rails are available for the rack you are using.
Parts Check List
• Rack Mounting Rail Kit.
Installation Procedure
Please see detail drawings supplied with the rack mounting rail kit for assembly details.
Latch
(both sides)
(Left hand assembly shown)
Figure 24. Rack Mounting Rail Kit
Chassis Installation
Parts Check List
• Chassis (complete with Backplane, Ops Panel and all plug-in modules installed).
• Rack mounting thumbscrews.
Procedure
1. Fit the Rack Mounting Rail Kit in accordance with the mounting kit Installation procedure.
2. Check chassis for damage.
3. Slide the chassis assembly onto the rack rails until the front flanges engage on the rack.
Ensure the chassis is centrally located.
4. If in doubt about correct orientation, the Operator’s Panel should be on the left hand side of
the enclosure.
5. Tighten the two mounting thumbscrews present on each chassis flange.