1.0
PRODUCT SUMMARY
1.1
Product summary
The MX 1x2 RF, a 19” 1U rack mounted 2×1 RF switch, is typically used for
simple switching or redundancy of the RF signal path. When one of the RF signal
inputs experiences a fault, it automatically switches to the other RF input signal,
ensuring the system’s continued operation.
1.2
Product features
•
High frequency monitor resolution.
•
Optional RS232 communicate port.
•
Optional Integrated SNMP network management function.
•
Automatic or manual switchover mode.
•
Switch reference level can be set by front panel.
2.0
CONTROLS, INDICATORS, AND ALARMS
This section of the manual will give an overview of the available menus in the MX series
RF switch and their descriptions. All instructions in Section 2.0 refer to the
representation of the front panel shown in the diagram below. The user scrolls through
the menus using the push bottoms found on the front panel, these are located just to
the right of the LCD screen.
Shown with RF ports on front panel for display purposes
2.1
Operation of the control panel
2.1.1
Open menu
A.
Plug in 110V power supply
B.
Turn on power switch located on the rear panel
Front panel will illuminate and show “
Model
”
