Maxcom MC6950, Быстрый старт

Страница: 21 / 53

Press on handset :
Select Base
If you registered the handset to more than one base, you can select any one of them to use
with your handset. You can only use the handset with one base at any one time.
x 3
Enter in the menu and Select HS SET
x 3 Select SEL BASE
Press MENU / OK and UP / DOWN to select the desired base. The currently selected base is
or
indicated by a *.
Press MENU / OK to confirm.
Note: The handset may take a short while to search for the new base.
Alarm setting
You can set an alarm on this phone. When an alarm is set, the alarm icon < > is shown on the
handset display. When the alarm time is reached, the alarm icon < > and ALARM ON flash on
the handset display, and the alarm tone rings for 45 seconds. You can press any key to disable
the alarm.
If the snooze function is activated, the alarm will sound again at the end of the snooze period of
seven minutes. You can also press and hold while the alarm is sounding, to stop the
alarm and turn off the snooze function.
Note:
a. A key press will still disable the alarm even if the handset keypad is locked when the alarm rings.
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to OFF , the alarm still sounds at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when
the alarm time is reached, the < > and ALARM ON will still flash. An
alarm tone will be emitted from the earpiece to alert the user the alarm time is
reached. Once the user presses any key or presses and holds to disable the alarm, the
display will revert to the call duration.
d. During paging or ringing, the alarm will not sound when the alarm
time is reached. However, if the snooze function is enabled and there is no
paging or ringing, the alarm will sound again at the end of the snooze period.
1
Turn on/off the alarm
x 5
Enter in the menu and Select ALARM
or
Press MENU / OK and UP / DOWN to turn on or off the alarm .
Press MENU / OK to confirm.