5–4
PARAMETERS
www.maxcessintl.com
MAGPOWR DTR-65
MI 850A349 1 D
Password
Parameter # Description
Range
P.00
Password
When the DTR-65 is locked, all parameters will be viewable but
cannot be changed and no calibrations can be performed.
To lock or unlock the DTR-65 press [
] to show the lock or unlock
status, displayed as ULOC for unlocked and LOC for locked.
To lock the DTR-65 the password must be entered twice. To
unlock the DTR-65 the password only needs to be entered once.
To lock the DLCA
Press [
] again and the display will show PAS1, press [
] and enter
the password using the [+] and [-] buttons. Press and hold [
] for
two seconds to enter the password.
The display now shows PAS2. Press [
] and enter the same
password using the [+] and [-] buttons. Press and hold [
] for two
seconds to enter the password.
The display now shows LOC for locked. Press [
] to return to
displaying tension.
To unlock the DLCA
Press [
] again and the display shows PAS1. Press [
] and enter
the password using the [+] and [-] buttons. Press and hold [
] for
two seconds to enter the password.
The display now shows ULOC if the correct password was entered.
Press [
] to return to displaying tension.
If the password was incorrect, the display shows LOC and the
DTR-65 is still locked. Press [
] to return to displaying tension,
and then repeat the unlock procedure.
{0, 9999}
