Maxcess FIFE DSE-17, Руководство по эксплуатации, Страница: 4 / 30

INTRODUCTION 1 - 1
DSE-17 www.maxcess.eu MI 1064 1 C
1 INTRODUCTION
About these operating
instructions
These Operating Instructions describe the installation,
commissioning, operation, and maintenance of the DSE-17
digital infrared sensor and provide important instructions for
proper use.
The operating instructions must be carefully stored and must
always be available at or near the customer's system during the
service life of the sensor.
Translation of the original Operating Instructions:
These Operating Instructions are a translation. The original
Operating Instructions were composed in German.
Target groups These Operating Instructions are directed to both the s
ystem
construction master
as well as the
operator
who uses the sensor
in production line.
Read operating instructions
The Operating Instructions must be read and used by
all persons
who have the responsibility of installing, commissioning,
operating and maintaining the sensor.
Proper use
The DSE-17 digital infrared sensor is used for no-contact
measurements of the lateral offset of a material web that is
being guided. The sensor is suitable for
– web edge guiding and
– web center guiding
The sensor can be used to control both opaque and transparent
materials.
The sensor must only be used in accordance with its intended
purpose and in a technically flawless conditions.
The sensor must not be changed or opened. The protection
panes are fastened with a special adhesive.