INSTALLATION
3 - 1
DSE-17
www.maxcess.eu
MI 1064 1 C
3 INSTALLATION
Transport and storage
– The sensor and/or the unit on which the sensor is mounted
must be secured against slipping during transport.
– The sensor must be stored in a cool, dry place.
– The sensor must not be stored in the vicinity of powerful
magnetic fields. The electronic components of the sensor
may be damaged.
Included with delivery
– Sensor DSE-17
The model designation, part number, and the firmware and
configuration numbers are on the nameplates on the
housing.
– Operating instructions
Mounting
WARNING
If a sensor is damaged, it must not be installed or placed in
operation.
All assembly tasks on the sensor must be performed when
there is no electrical power in the system.
Assembly tasks and mechanical settings must only be
performed when the machine has been stopped and has been
secured from being turned on again.
Mounting location
– Protection Class: IP65
– Operating temperature: 10°C ... 50°C
– Relative humidity: up to 90% non-condensing
– Operating altitude: max. 3000m
– Protect from vibrations
– Not in the vicinity of strong magnetic fields
The electronic components may be damaged.
– Not in places where there is a risk of explosions.