i-32V5
Pompe di calore inverter aria/acqua con ventilatori assiali
10
SETPOINT
DESCRIPTION
UNIT
DEFAULT
RANGE
**rHEA
Mixing valve Winter setpoint
°C
30.0
0.0 ÷ 80
(*) If the DHW function is enabled, see par. 10.2
(**) If Gi accessory is included, access is only possible with installer password.
5.3 PASSWORD MENU [PSS]
Enter the password according to the desired access level. Confirming the value automatically activates the access level and the items of the
menus enabled at that level will appear.
5.4 PROBES MENU [
tP
]
The value of the different probes appears. The number of visible probes depends on whether or not the I/O expansion modules are present.
Particular situations:
•
Err = probe faulty
•
--- = probe not used (no function associated to that probe)
Entering the “tP” analogue inputs menu with the installer password allows you to read the values of the probes present:
tP
DESCRIPTION
Unit of measurement
t01
Inlet water temperature
°C
t02
Outlet water temperature
°C
t03
Compressor intake temperature
°C
t04
Compressor discharge temperature
°C
t05
Outdoor air temperature
°C
*t06
DHW probe temperature
°C
*t07
Plant remote probe temperature
°C
t09
Low pressure
(bar)
t10
High pressure
(bar)
t11
Water flow
(l/min)
**t15
Mixer probe temperature
°C
**t16
Solar storage tank probe temperature
°C
**t17
Solar collector probe temperature
°C
(*) If enabled
(**) If Gi accessory present and enabled.
Please note that the menu is password-protected.
5.5 ALARMS MENU [
Err
]
This menu is only displayed if there are triggered alarms. All of the active alarms can be seen.
5.6 DIGITAL INPUTS MENU [
Id
]
The status of the digital inputs are displayed:
0=deactivated
1=active
----=input not configured
Please note that the menu is password-protected.
5.7 PARAMETERS MENU [
Par
]
The parameters are gathered into groups. Each group is identified by a three-digit code, while the index of each parameter is preceded by a
letter.
DESCRIPTION
IDENTIFICATION CODE OF THE
GROUP
PARAMETER INDEX
VISIBILITY
Configuration
CnF
H01-
INSTALLER
Compressor
CP
C01-
INSTALLER
Alarms
ALL
A01-
INSTALLER
Regulation
rE
b01-
INSTALLER
Pump
PUP
P01-
INSTALLER
Electric heaters
Fro
r01-
INSTALLER
Defrost
dFr
d01-
INSTALLER
Hz min / max
LbH
L0-
INSTALLER
*Solar
SUn
S01-
INSTALLER
