Max PASJ30(CE) Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 28

Max PASJ30(CE) Скачать руководство пользователя страница 9

9

INDEX
1. GENERAL POWER TOOL SAFETY WARNINGS.............9
2. PRUNING SHEARS SAFETY WARNINGS .....................12
3. SPECIFICATIONS AND TECHNICAL DATA ..................14
4. CHARGING METHOD ......................................................17
5. PREPARATION FOR USE ...............................................20
6. HOW TO REPLACE BLADES .........................................23
7. MAINTENANCE PROCEDURE........................................24
8. HOW TO READ CONTROL BOX AND SHEAR LAMPS .. 26
9. SIMPLIFIED OPERATION CHART ..................................28

1. GENERAL POWER TOOL

SAFETY WARNINGS

1. WORK AREA SAFETY

•

Keep work area clean and well lit.

Clut-

tered or dark areas invite accidents.

•

Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.

Power tools create sparks which may ig-
nite the dust or fumes.

•

Keep children and bystanders away
while operating a power tool.

Distrac-

tions can cause you to lose control.

2. ELECTRICAL SAFETY

•

Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.

Unmodified

plugs and matching outlets will reduce risk
of electric shock.

•

Avoid body contact with earthed or
grounded surfaces, such as pipes, radi-
ators, ranges and refrigerators.

There is

an increased risk of electric shock if your
body is earthed or grounded.

•

Do not expose power tools to rain or
wet conditions.

Water entering a power

tool will increase the risk of electric shock.

ENGLISH

OPERATING AND MAINTENANCE MANUAL

READ ALL SAFETY WARNINGS AND ALL
INSTRUCTIONS.

Failure to follow the warnings and instructions
may result in electric shock, fire and/or seri-
ous injury.

Save all warnings and instruc-

tions for future reference.

The term "power

tool" in the warnings refers to your mains-op-
erated (corded) power tool or battery-operat-
ed (cordless) power tool.

WARNING

PASJ30.book 9 ページ２０１１年１２月９日　金曜日　午後２時１１分

«
...
7
8
9
10
11
...
»

Содержание PASJ30(CE)





























Отзывы:

Нет отзывов