Max PASJ30(CE) Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 28

Max PASJ30(CE) Скачать руководство пользователя страница 19

19

•

When the orange LED lamp blinks and short beeps keep sounding for approximately 10 sec-
onds: Charging failed

You cannot charge the battery. If this occurs, first unplug the power cord from the wall socket. Next,
remove the battery pack from the charger, and check whether any foreign substances have entered
the terminals of the battery pack or charger. If any foreign substances are found, remove them using
a soft material.
If no foreign substances are found, or if the orange LED lamp is still blinking even after foreign sub-
stances have been removed, the battery pack may have expired, or the battery pack or charger may
be malfunctioning. If you have an extra battery pack, use it. If the orange LED lamp still blinks, return
the battery pack and charger to your dealer for inspection or repair.

•

When a fully charged battery pack is set on the charger again, the red LED lamp may light up,
but this is not a failure. The lamp will soon turn green, indicating that the battery is fully
charged.

•

The charger has a cooling fan that may start working due to the temperature of the battery pack
and charger. The fan stops working when the temperature drops.

•

Certain ambient temperature conditions or the battery pack may prolong the charging time.

•

Charging several battery packs continuously may prolong the average charging time.

•

Once charging is completed, allow the charger to rest for approximately five minutes before
charging again.

•

In the following cases, return the battery pack and charger to your dealer for inspection or re-
pair, since they may be faulty.

−

When the power cord is plugged into a AC100V - 240V wall socket, the red LED lamp does not blink.
(with the battery pack not set.)

−

When the battery pack is connected to the charger, the red or orange LED lamp does not light or
blink.

−

When the battery pack is hot and the orange LED lamp lights up, the red LED lamp does not light up
60 or more minutes have elapsed.

−

When the red LED lights up, it does not start blinking green after 90 or more minutes have elapsed.

CAUTION

PASJ30.book 19 ページ２０１１年１２月９日　金曜日　午後２時１１分

«
...
17
18
19
20
21
...
»

Содержание PASJ30(CE)





























Отзывы:

Нет отзывов