Max AKHL1260E Powerlite, Инструкция по эксплуатации

Страница: 9 / 23

9
DEATH OR SERIOUS BODILY INJURY COULD
RESULT FROM IMPROPER OR UNSAFE USE OF
COMPRESSOR, TO AVOID THESE RISKS, FOL-
LOW THESE BASIC SAFETY INSTRUCTIONS.
HIGH PRESSURE COMPRESSOR PROVIDES
BOTH HIGH PRESSURE AND REGULAR PRES-
SURE AIR. FOR USAGE OF HIGH PRESSURE
AIR, HIGH PRESSURE COMPRESSOR IS DE-
SIGNED ONLY FOR MAX POWERLITE NAILERS
AND POWERLITE HOSE. UNSPECIFIED USAGE
WILL CAUSE SERIOUS ACCIDENTS.
1. NEVER TOUCH MOVING PARTS
Never place your hands, fingers or body
parts near the compressor's moving parts.
2. NEVER OPERATE WITHOUT ALL
GUARDS IN PLACE
Never operate the compressor without all guards
or safety features in place and in proper working
order. If maintenance or servicing requires the
removal of a guard or safety features, be sure to
replace the guards or safety feature before re-
suming operation of the compressor.
3. ALWAYS WEAR EYE PROTECTION
Always wear safety goggles or equivalent eye
protection. Compressed air must never be aimed
at anyone or any part of the body. Be sure to wear
protective gear including the sound-proofing and
protective garment, crash cap and safety foot-
wear suited for the given working environment.
4. PROTECT YOURSELF AGAINST ELEC-
TRIC SHOCK
Prevent body contact with grounded surfac-
es such as pipes, radiators, ranges and re-
frigeration enclosures. Never operate the
compressor in damp or wet locations.
5. DISCONNECT THE COMPRESSOR
Always disconnect the compressor from the pow-
er plug and remove the compressed air from the
air tank before servicing, inspecting, maintaining,
cleaning, replacing or checking any parts.
6. AVOID UNINTENTIONAL STARTING
Do not carry the compressor while it is con-
nected to its power source or when the air
tank is filled with compressed air. Be sure the
power switch in the "OFF" position before
connecting the compressor to its power
source.
7. STORE COMPRESSOR PROPERLY
When not in use, the compressor should be
stored in dry place. Keep out of reach of chil-
dren. Lock-out the storage area.
8. KEEP WORK AREA CLEAN AND WELL LIT
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
9. KEEP CHILDREN AWAY
Do not let visitors contact compressor extension
cord. All visitors should be kept safely away from
work area. Keep out of reach of children.
10. NEVER USE THE MACHINE IN ANY
UNSTABLE PLACE
Never use it in a place where it could move or
fall of itself. Be sure to install the compressor
on a flat floor, with leg rubber underneath it;
the allowable tilt angle of the floor is up to 10
degrees. If the installation floor is tilted and
slippery, ensure that the compressor does not
move during operation. Do not use it on a
shelf or stand where it may fall or tumble.
11. DRESS PROPERLY
Do not wear loose clothing or jewelry. They
can be caught in moving parts. Wear protec-
tive hair covering to contain long hair.
12. DO NOT ABUSE POWER CORD
Never yank it to disconnect from receptacle.
Keep power cord from heat, oil and sharp edges.
13. MAINTAIN COMPRESSOR WITH CARE
Inspect cords periodically and if damaged,
have repaired by authorized service facility.
14. USE A SAFE EXTENSION CORD
In order to prevent an electric shock, use a 3-
core extension cord with a 3-pole earthing
plug and a 3-core earthing plug socket.
Make sure that the extension cord is in the
good working condition. If the cord is dam-
aged, replace or repair it. The cord should
have a sufficient capacity for the current run-
ning to the product. The cord of an insuffi-
cient capacity will cause a voltage drop or an
electric power loss, resulting in overheating.
The following table shows the cord size used
depending on the cord length.
If the compressor is to be used outdoors, use
an exclusive extension cord.