KK-642.014 Rev.No:1 01.08.12 Page | 11
***
CHANNELS
*** Channel
1config
ıuration Detector
measurement range : Zero
forcing:
2 mA condition:
Warm-up delay :
-----------------------------------------------------------
Exit
– Pre-menu
*** CHANNELS ***
Channel 1config
ıuration
Fire Reset time :
1
st
Level Alarm position :
1
st
Level Alarm Entrance Value:
1
st
Level Alarm End Value :
------------------------------------------------------------
Exit
– Pre Menu
*** CHANNELS ***
Channel 1 Configuration
2
nd
Level Alarm Position Value :
2
nd
Level Alarm Entrance Value :
-------------------------------------------------------------
Exit - Pre Menu
10.2 Access Level 2
In order to get into the access level 2, person shall use the password
“1111”.Password display as the
following table.
*
ACCESS LEVEL 2
*
Enter Access Level 2 Password
****
------------------------------------------------------------
Exit
– Pre Menu
In this screen, first press to
“Up (+)” button and instead of the star “*”, number 1 comes to the end. Then by
pressing
“Enter “button 4 times makes the user to get in access level 2.
The screen of the
“Access Leve2” pops up, if correct password is entered, by the functions here control
panels operating features are programmed.
***
ACCESS LEVEL 2 ***
> Inhibit
Zeroing
Calibration
Test
Configure
------------------------------------------------------------
Enter
– Ok Exit – Pre
Menu
10.2.1 Inhibit
By use of Inhibit function, any channel or all channel of the control panel can be inhibited.
