Controls
25
7
.15
Control panel
The description can be found in the separate instruction manual for the control panel.
7
.14
Bobbin thread control by stitch-counting
When the pre-set number for stitches have been sewn, the machine stops and the signal
"
Bobbin
" appears on the display.
After the pedal has been released and the forwards sewing function has been operated
twice, the seam can be completed.
The display goes off and the LED in the
F1
key
flashes as a reminder.
After the thread trimming operation and the bobbin change, the
F1
key on the
control panel must be pressed. When sewing begins, the new pre-set counting
process begins.
Pre-setting the number of stitches, see Chapter
8.04 Setting the bobbin thread
control.
