Setting up
28
Switch off the machine!
Danger of injury due to uninten-
tional starting of the machine !
Set take-up lever at its top position.
Open bed slide, lift latch
1
and take out
the bobbin. Place the filled bobbin into
the hook so that the bobbin turns as
shown by the arrow when the thread is
pulled.
Close latch
1
again.
Pull the thread through slot
2,
around
stop
3
and into hole
4.
Close the bed
slide again.
Regulate the bobbin-thread tension by
turning screw
5.
Do not run the machine with the bed slide o pen.
Danger of injury by moving parts.
8
.03
Bobbin-changing/threading, and regulating the bobbin thread tension
8
.04
Setting the bobbin thread control function by reverse stitch counting
(only with EcoDrive and PicoDrive)
Switch on the machine.
Call up the parameter input function by pressing the
Scroll key
.
Press the
TE key
to switch the function keys to the input function (LED in the
TE key
is on).
Select parameter "
660"
by pressing the appropriate
+/- keys
, and set the value at
2.
Press the
scroll key
to select the "
TM
" function.
Set the number of stitches, which can sewn with a filled bobbin, by pressing the
appropriate
+/- key
.
Change to the "RM" function by pressing the "
TE
" key (diode is off).
Take over the set value by pressing the "
F1"
key.
Fig. 8 -03
2
3
4
6
1
