QUICK ST
AR
T
TURNING ON CONSOLE
Connection Problems
Whenever the headset fails
to read your brainwaves,
the console will say,
“Check headset sensors.”
If this happens during a
game, the game timer will
pause until the signal is
restored. Refer to
the TROUBLESHOOTING
section for tips on
connection problems.
Control Knob
On
Off
Fan Nozzle
Start Spaces
Select Button
Enter Button
Sensor LEDs
7
1 .
Move the fan nozzle to either start space by turning the control
knob – the start spaces are marked with arrows. Place a ball above
the fan nozzle.
2 .
Turn on the console.
3 .
When the console says “Select Game,” press the SELECT button
(white) until you hear “Freestyle.”
4 .
Press the ENTER button (gray) to
confirm your choice of “Freestyle.”
5 .
It may take a few seconds for the
console to communicate with the
headset. Just remain still until
it does so. Once a connection is
established, the console will beep
and tell the player, “Begin.”
