32
TROUBLESHOO
TING
TROUBLESHOOTING
CONNECTION PROBLEMS
If you receive the message “Check headset sensors,” make the following adjustments. Be sure to wait about 5 seconds
after each adjustment to see if the issue has been corrected – if so, you will hear “Calibrating headset.”
• Make sure the sensor is pressed tight and flat against your forehead. Adjust the headband if necessary.
• Make sure no hair is caught between the sensor and your skin.
• Move the forehead sensor to a slightly different position above your left eye.
• Remove then reattach the clips to your ears.
• Make sure both clips are pressed flat against your ear lobes.
• Leaving the headset on your head, turn the headset off and back on.
• Clean the surfaces of the forehead and ear clip sensors with a cloth or paper towel moistened in warm, soapy water.
• Visit
www.mindflexgames.com
for additional help.
NOTE: If you receive the message “Check headset sensors” during a game, the game timer will pause until you
reestablish a good connection .
When exposed to an electrostatic source, the product may malfunction and suffer memory loss . If this occurs, reset the
product by turning the console off then on .
